Since we changed out our stone clamp, we had to come up with a new capstone design. The new clamp does not grasp the old capstone. We will have to preload the capstone as it will not properly go into the intake like the old capstone. We will have to design some sort of stand on which to place the preloaded capstone. More to follow. Below is our new design and 3D print.

Note: We have been using Tinkercad to design since our internet at school is down. Tinkercad is what we have available to use offsite.
Printing with Cura.
The finished capstone at 3” x 4” x 4.5”.
The finished capstone at 3” x 4” x 4.5”.